Facebook Pixel

FOLLOW US

Bulldozer Accidents

start your free consultation
Home Bulldozer Accidents

Construction sites are recognized as one of the most dangerous places to work in the US. Workers sometimes use a heavy machine at a construction site for all sorts of tasks. This machine is called a bulldozer. As per Bureau of Labor (BLS) figures, out of a reported 4,206 construction site-related fatalities in 2010, as many as 774, or 18.4 percent, were a direct outcome of bulldozer accidents. Typical bulldozer accidents included crushing incidents, rollovers, run-over accidents, and getting trapped.Experience is not a Guarantee.

A bulldozer is a powerful machine that requires the operator to have advanced training and knowledge on how to use and operate this machine. However, even when the operator of a bulldozer is fully trained and experienced, accidents still occur. Since the size of the bulldozer is massive, serious injuries are often fatal or catastrophic. Bulldozer accidents sometimes take place because of the negligence of the individual operating the machine. A bulldozer accident may occur due to a faulty machine, defective or substandard parts, or inadequate safety features. When a bulldozer collides or rolls over with another vehicle, it can crush anything in its path. Bystanders are also at risk of getting injured if the operator fails to notice the person on the ground, loses control of the machine or loses control of the bulldozer’s materials.Types of Bulldozer Injuries

Some of the typical injuries caused due to bulldozer accidents may include:

The Risks are Extreme

Injuries from bulldozer accidents can often lead to permanent or severe damage. A construction worker who has suffered this type of injury may never be able to work again. In many cases, the victims must undergo continued medical procedures, and the road to recovery could be extended if even a full recovery is possible. The victim may only be able to recover to a certain extent. This can put the victim and their family under significant financial strain during this time, and they may never be able to reach the level of income they were at before this disaster occurred.Defective Bulldozers

A defective bulldozer could cause the heavy machine to malfunction while the equipment operates. Sometimes a faulty bulldozer could mean that some vital safety component is missing or something essential that helps the machine move and do work. Common causes of a faulty bulldozer may include:

  • Fault in the design or manufacture of the machine
  • Lack of proper instructions to operate
  • Lack of adequate safety warnings
  • Irregular maintenance of all or a few critical parts of the bulldozer

Bulldozer Fatalities

A study published by the Census of Fatal Occupational Injuries Research File showed that between 1992 and 2003, the loading and unloading of mobile equipment caused an average of nine construction site fatalities per year. Bulldozers were the standard construction machine involved in most of these fatalities. The study revealed that these fatalities included heavy equipment operators, construction laborers, truck drivers, and site managers. In as many as three out of four cases, the fatality occurred due to the bulldozer flipping upside down as it was driven on or off a trailer. Most deaths in these cases occurred while the loading or unloading was being carried out. The report also said that another fatal cause on the worksite was when someone was struck by the bulldozer or another machine or got stuck between the trailer and either materials or the bulldozer.

Watch Youtube Video
Man Dies After Bulldozer Accident at Naples Business. This video shows a news report about a 21-year-old man who was crushed to death at a construction site in Naples.

Negligence is a Real Possibility

Negligence may also cause a bulldozer accident. Operators using this machine sometimes fail to ensure that the path is clear before putting the bulldozer in motion, putting others at risk and other machines and structures at risk. When construction work is taking place near a road, there is plenty that can go wrong. The bulldozer operator has to be alert for nearby passing traffic.Safety Tips

Although there is an inherent risk when working with a bulldozer, workers can take some safety measures to minimize the risk. Operating a bulldozer safely is critical because the machine is mighty, and catastrophic injuries or death is a real possibility if something goes wrong. Some of the vital safety measures that should be taken to protect workers operating or working around a bulldozer could include:

  • The bulldozer should only be used by a qualified operator.
  • The operator should always wear a seatbelt.
  • The operator should follow proper tagout, blockout, and lockout procedures.
  • Where barricades and signs cannot control the traffic, flaggers should be assigned.
  • The bulldozer must be kept from the water main and overhead power lines.
  • Warning devices should be audible throughout the construction site.
  • The engine must be shut off while refueling.
  • A rollover protection structure should be included on the bulldozer.
  • Do not climb where there is no specified foot or handhold.
  • Identify potential hazards in advance, such as a structure taller than the bulldozer that could collapse over it (or any structure for that matter).
  • Use appropriate procedures and systems to secure an unattended bulldozer from movement.
  • Do not operate a bulldozer without a pre-shift inspection for brakes, fluid levels, signals, etc.
  • Never carry a passenger on a bulldozer.
  • Always park the bulldozer on level ground.
  • While loading or unloading equipment, avoid steep angles by ensuring that the trailer ramp is of sufficient size.

Apart from safe equipment handling, safety experts recommend that workers be trained to help each to avoid bulldozer accidents. To stay safe, workers should spot each other while positioning and operating the machine by providing correct directions to the driver and staying alert. At the same time, materials are loaded or unloaded, ensuring that only proven or trained operators operate the loading and unloading of equipment at any given time.Legal Obligations of California Employers

Training in health and safety is one of the foremost requirements in Injury and Illness Prevention Programs (IIPPs), which are mandatory in California. Even contractors and temporary workers who work at a job site or a place of work must also be trained before taking up an assignment. The employer can use external training providers to create and execute a training program. Industry-specific and general “Safety Orders” also sometimes include additional requirements for training. For more information about employer obligations in California, click here.Bulldozer Accident Lawyer

If you’ve been injured in an accident, please contact me for free professional advice. Call me at: (800) 404-5400 or (209) 227-1931.

We are a part of the well-regarded Million Dollar Advocates Forum and the Top One Percent.

Review some of our verdicts & settlements and check past clients’ ratings on consumer websites, including Yelp,Google, and Avvo.

Editor’s Note: updated [cha 7.31.23] Photo Attribution: pixabay.com br cha [cs 1267]

    HOW CAN WE HELP?